Add To Your Home's Security And Put Your Mind At Ease

• 74 LED lights
• Illuminates those areas which do not have access to line voltage power
  
• Light beams reach up to 5m/16ft, 270 ° wide angle
• Motion-sensored, can read 120 °
• Provides up to 8 hours of light on one charge
• No wires or batteries needed
• 300 lumens
• Water and weather proof
• Heat & Cold-Resistant
• The 3 adjustable heads make it so you can move upward, downward, left or right

Widely Applicable, Mount It Anywhere!

3 Working Modes:

High Level Light Press the red power button once. Puts the light in bright mode when motion sensor is detected, then the light turns off after 20-25 seconds once motion is no longer detected.

Dim Mode + High Level Light Press the red power button twice. Puts the light in bright mode when motion sensor is detected, then the light changes to dim mode for 20-25 seconds once motion is no longer detected.

Low Level Light Press the red power button three times. Turns the light on low level consistently throughout the night, not dependant on the motion sensor.

Power Off On the fourth press of the red power button, the light will turn off completely.

How It Works

The SolGuard outdoor solar powered motion light is the perfect solution for hard to light areas. No power outlets are needed, simply install the solar panel in direct sunlight. The light captures natural light and transforms it into solar energy. No other source of power is required. During the day the light will charge and at night it will supply you with bright wide angle light.

The SolGuard detects the motion of people, animals or other objects over a range of 120°. It provides 8 hours of light up to a distance of 5 meters/16 feet. The 3 adjustable light heads can be moved up, down, left and right to provide maximum light coverage in any area. Made of durable materials this light will withstand all kinds of extreme weather conditions. Easy to install on any outdoor wall surface including metal, wood or plastic.

Light up all your dark outdoor areas with the SolGuard.

Easy To Install

1. Charge under sunlight for one day before installation

2. Install in desired location using included screws and plugs

3. Adjust solar panel to ensure it is in direct sunlight for charging

4. Adjust 3 light heads for desired light angles

*Please note: Light modes will not work in the daylight

Caution: For outdoor use only. Lightbulbs and batteries cannot be replaced. Place light in area which receives natural daylight.

Specifications:
Rugged IP65 weather resistant ABS construction.
Battery: 2 x 18650, 2400mAh (Built-in)
Output voltage: 4.2V
Solar panel input voltage: 5.5W
Includes (1) SolGuard Light, (3) screws, (3) plugs, (1) bracket for installation